• Hold Mode: Drink only while holding the control
• Toggle Mode: Continuous flow with a single input
• Burst Mode: Custom timed pulses for quick, controlled sips

Fully configurable through the custom SRC DrinkBox control application.

• Configure all TriMode behaviors
• Customize RGB status LED colours per mode, the module glows the colour you choose when each mode is active
• Simple and intuitive interface
• Compatible with any input device recognised by Windows: Fanatec, Thrustmaster, Logitech, Moza, custom button boxes and more

• Liquid only contacts the tubing, never the pump
• Hygienic and safe for any beverage
• Easy to clean and maintain
• Consistent and precise flow control

Designed for reliability, cleanliness, and long-term use.

• Pump-driven system delivers your beverage directly through a tube
• Compatible with virtually any drink, also fizzy or alcoholic
• No need to reach for bottles or break focus
• Compatible with the optional SRC 4040 Profile Magnetic Mount Plate: attach your tube holder anywhere on your rig

• Integrated magnetic holder for the mouthpiece
• Snaps securely onto the hidden internal steel plate in the DrinkBox itself
• Can also attach to any magnetic surface on your rig

Keeps your drink tube exactly where you want it: clean, accessible, and out of the way.

• Equipped with a proven blue bite valve design
• Natural, one-handed operation while driving
• Easy to use, reliable, and replaceable

Compatible with standard hydration components and future SRC upgrades.

The SRC-100 DrinkBox features VESA 50/75 mounting points on the rear and can also integrate seamlessly with the SRC ModuRig System like all of our modules

Different mounting options are available above:

• No Mounting Arm: use our ModuRig brackets or your own VESA 50/75 adapter.
• SRC Flex Arm - Bottom Mount: full size arm for maximum reach and flexibility. Mounts via the front plate ModuRig holes. Recommended if you plan to use the SRC Can Dock
• SRC Flex Arm Mini - Bottom Mount: compact arm, ideal for tighter setups. Mounts via the front plate ModuRig holes. Recommended if you plan to use the SRC Can Dock
• SRC Flex Arm - VESA Mount: full size arm using the rear VESA 50/75 points. ⚠️ Not compatible with the SRC Can Dock
• SRC Flex Arm Mini - VESA Mount: compact arm using the rear VESA 50/75 points. ⚠️ Not compatible with the SRC Can Dock

💡 Tip: Planning to use the SRC Can Dock? Always choose a Bottom Mount option, the can holder attaches to the rear VESA points which must remain free.

SRC Can Dock (optional add-on) Keep your drink can directly on your rig, right behind the DrinkBox. The SRC Can Dock attaches to the rear of the module and supports a wide range of can sizes:

• 250ml slim cans
• 330ml standard cans
• 500ml cans
• Various slim and wider formats

SRC-MagMount (optional add-on) A small plate that screws directly onto any 4040 aluminium profile rig. Once mounted, it acts as a  anchor point for your magnetic mouthpiece tube holder. Keep your tube exactly where you want it, anywhere on your rig.

Features our signature safety-capped power switch

Race Car-Inspired Safety: The toggle switch activates by closing the safety cover, a design rooted in motorsport to prevent accidental power-offs during a race.

The SRC-100 DrinkBox uses a simple and flexible tubing system designed to adapt to any sim racing setup.

• Inlet (rear): connects your bottle to the DrinkBox
• Outlet (front): routes to the mouthpiece

Includes 2.5 meters of high-quality, food-safe tubing, allowing you to fully customize your layout.

• Cut to your preferred lengths for inlet and outlet
• Easily adapt to any rig configuration or mounting position
• Tubing can be trimmed easily using standard scissors

Designed for low-maintenance, hassle-free use.

• After use:
  Flush the system with clean water for 20–30 seconds.
  Then run the pump briefly until the tubing is clear, so no liquid remains inside.
• After sugary drinks:
  Always flush thoroughly with clean water to prevent buildup.
• Regular cleaning:
  Occasionally run warm water with a small amount of mild detergent, then flush with clean water.
• Deep clean (as needed):
  Use warm water with a bit of vinegar, then rinse thoroughly.

Avoid alcohol-based cleaners, as they may reduce the lifespan of the tubing.

High-quality 3D printed front and rear panels with a carbon fiber weave texture and finish built directly into the material. Not a sticker, not a wrap, not a decal. Side panels are finished in matching satin black. Select your preferred variant above.

• SRC-100 DrinkBox
• Inlet & outlet tubing 1x2.5m (cut to size)
• Bite valve mouthpiece
• Magnetic mouthpiece holder on tube
• Power adapter
• USB cable
• Mounting hardware for ModuRig System
• Mounting bolts for Vesa points