1 0

    SimRacingCraftsmen

    DRIVER HYDRATION KIT + CAR SIDE CONNECTOR BUNDLE

    DRIVER HYDRATION KIT + CAR SIDE CONNECTOR BUNDLE

    €0,00 EUR
    €0,00 EUR
    Sale Sold out
    Taxes included. Shipping calculated at checkout.

    Both sides of the system, one package. The Driver Hydration Kit handles everything on the driver side, connector housing, tubing, bite valve and velcro positioners. The Car Side Connector mounts permanently on your rig. Snap in when you get in, press the button and it springs apart when you get out. Complete, ready to use, nothing else needed.

    Standard configuration: Male CPC driver side, Female CPC car side, check valve included. Everything set up the right way from the start.

    All SRC and RRC products use the same 4x7mm food-safe silicone tubing, everything in the system works with this tubing size.

    The same kit is available for real racing at realracingcraftsmen.com

    Key Features

    Complete Driver and Car Side Setup

    • Male CPC Driver Hydration Kit — standard driver side configuration
    • Female CPC Car Side Connector — standard car side configuration
    • Press the button on the female fitting to disconnect — springs apart cleanly every time
    • Watertight on connect and disconnect — no drips even with a full line
    • 3/16" CPC dry break fittings throughout — same standard across the entire SRC and RRC system

    Driver Hydration Kit Includes

    • Driver connector housing with Male 3/16" CPC fitting
    • Ridged grip on both halves for secure handling even with gloves
    • Two bolt-together halves wedge the CPC fitting and radio plug securely in place
    • Spacers included for most radio plug sizes — works with virtually any comms setup
    • 1m food-safe silicone tubing
    • Bite valve — bite to drink, release to seal, watertight when not in use
    • 2x Velcro Tube Positioners with helmet sticky pads

    Car Side Connector Includes

    • Car side connector housing with Female 3/16" CPC fitting
    • Spacers included for most radio plug sizes
    • Duckbill check valve — one way valve, no backflow, no drips when disconnected
    • 4040 profile mounting hardware

    For Sim Racing
    SRC products are designed and manufactured for sim racing use only. Not suitable for real racing environments or vehicles. For real racing car use, see realracingcraftsmen.com

    Compatible Products

    SRC-100 DrinkBox — The heart of the SRC system. Connect your Car Side Connector tubing straight to the DrinkBox inlet — same 4x7mm spec, all fits in one go.

    Race Bottle — 950ml insulated bottle. Use with the CPC Quick-Connect Cap and SRC Endurance Bottle Dock for a complete pitstop setup, or upright in the SRC Bottle Mount with the Sipping Cap.

    Race Bottle Cap — CPC Quick-Connect Cap for upside down mounting in the SRC Endurance Bottle Dock, or Sipping Cap for upright use in the SRC Bottle Mount. Same caps used in real endurance racing.

    SRC Endurance Bottle Dock — Integrated 3/16" CPC fitting — same standard as this bundle. Slam your bottle in, latch locks it, swap in seconds.

    SRC Bottle Mount — Simple upright bottle mount for your 4040 profile rig. Use with the Sipping Cap or add a CPC Coupling for upside down use.

    SRC Tubing — Need a longer tubing run? Same 4x7mm food-safe silicone, works with everything in the system. Available in 2.5m or 5m.

    Bite Valve — Replacement bite valves. Replace regularly for best hygiene.

    Duckbill Check Valve — Replacement check valves for the Car Side Connector. Replace periodically for best performance.

    CPC Coupling — 3/16" male or female dry break coupling. Add snap points anywhere in your tubing run or panel mount on your rig.

    Care and Maintenance

    Designed for low-maintenance, hassle-free use.

    • After use: Flush the connector with clean water for 20-30 seconds, then run the system briefly without liquid to clear excess moisture
    • After sugary drinks: Always flush the connector thoroughly with clean water to prevent buildup
    • Regular cleaning: Occasionally run warm water with a small amount of mild detergent through the connector, then flush thoroughly with clean water
    • Deep clean (as needed): Use warm water with a bit of vinegar through the connector, then rinse thoroughly
    • Bite valve: Replace regularly for best hygiene

    Avoid alcohol-based cleaners, they may reduce the lifespan of the seals and fittings.

    Going real racing?

    The same kit is used in real endurance racing cars. Find the full RRC system including the RRC DrinkBox, RRC Endurance Bottle Dock and complete team packages at realracingcraftsmen.com

    Explore the RRC Range at realracingcraftsmen.com

    What's in the box?

    Always included:

    • 1x Car Side Connector Housing with Female 3/16" CPC fitting
    • 1x Duckbill Check Valve
    • Spacers for most radio plug sizes
    • 4040 profile mounting hardware

    Per Driver Hydration Kit (1, 2 or 3 — your choice):

    • 1x Driver Connector Housing with Male 3/16" CPC fitting
    • Spacers for most radio plug sizes
    • 1m food-safe silicone tubing (4x7mm)
    • 1x Bite Valve
    • 2x Velcro Tube Positioners
    • 2x Helmet Sticky Pads
    View full details